BUILT FOR EXTREME SNOW AND WIND

MAXIMUM STEEL - MAXIMUM RIGIDITY

THE TOP-TIER FABRIC SHELTER SYSTEM

Alpine Pro Dual Truss stands as the most premium fabric shelter system in Canada. It targets demanding environments where structural margin matters more than cost savings. Higher steel content, tighter engineering tolerances, and premium fabric options place it at the top of the Alpine lineup. This system exists for operators who want the strongest option available, period.

Can't Find Your Size?

Check out our 3d Shelter Builder

BUILT FOR THE EXTREMES

How does the Alpine Pro handle heavy snow?

Tight truss spacing as low as 5ft 6inch and reinforced steel reduce deflection under sustained snow loads.

Why does this bay length matter?

Shorter bay lengths reduce roof deflection and distribute snow loads across more steel trusses.

Is this system suited for northern regions?

Yes. It targets high snow zones and harsh winter exposure.

THE MAXIMUMS

What makes the frame different from other dual truss systems?

Heavier gauge steel, closer spacing, and higher frame counts per length.

Does more steel change long-term performance?

Yes. Frame stiffness stays consistent over time under load.

How does this affect shelter lifespan?

Reduced movement leads to longer frame and fabric life.

TOP TIER SHELTERS

What cover options pair with Alpine Pro?

Premium heavy 910g PVC covers designed for long-term outdoor exposure. Built right to last longer then the competition.

Who should choose Alpine Pro over Alpine Dual Truss?

Customers facing high snow loads or seeking the highest structural margin.

What does this mean long term?

More trusses, shorter bays, and consistent spacing deliver stable performance season after season.

ALPINE PRO PREMIUM SHELTERS

Super tight truss spacing. Highest load capacity. Built to handle the most EXTREME snow and wind conditions across Canada.

FEATURES

End Wall Panel Types

Choose between main crank up doors with an aluminum man door or full fabric end walls to match how your shelter will be used.
End panel options support walk in access, drive through equipment flow, or fully enclosed storage while maintaining proper fit, strength, and long term performance.

Door Sizes

Door sizes are matched to shelter width for proper clearance and structural fit.
20 ft wide shelters use 10 × 13 doors (WxH)
30 ft wide shelters use 15 × 14 doors (WxH)
40 ft wide shelters use 15 × 17 doors (WxH)
50 ft wide shelters use 15 × 17 doors (WxH)
Options include main roll up doors and aluminum man doors.

Fabric Options

Multiple fabric weights are available based on use and climate.
610 g PVC
910 g PVC (Premium)

SPECIFICATIONS

Whats in the Kit

Each Alpine Dual Truss shelter kit includes all primary structural and enclosure components required for assembly and long term use.

Included Components:
• Dual tube steel trusses built from 2 inch 15 gauge steel
• Steel purlin tubes sized at 1 1/2 inch 16 gauge
• Crank style fabric main doors with reinforced metal door frames
• Aluminum man door sized 3 ft wide by 6 ft 6 in high (If option is selected)
• Standard sidewall height set at approximately 12 ft
• Heavy duty steel footplates with pre drilled anchor holes
• Ground anchor pins supplied as rebar spikes
• Concrete anchor bolts available upon request
• Integrated air vents on both end panels when end panels are selected

Foundation Requirements

Alpine Dual Truss shelters are designed to mount on multiple foundation types depending on site conditions and use.

Accepted Foundation Types:
• Compacted gravel base with proper drainage
• Concrete pad or concrete strip footing
• Concrete blocks or grade beams
• Asphalt surface with approved anchors

Anchoring Requirements:
• Steel footplates include pre drilled holes for anchoring
• Rebar anchor pins are supplied for gravel or soil installs
• Concrete wedge anchors or bolts are used for concrete foundations
• Anchor type and quantity depend on shelter size and site conditions

Site Preparation:
• Foundation must be level across the full footprint
• Proper drainage is required to prevent water and frost issues
• Local soil conditions and frost depth should be considered before installation

For high snow or wind zones, concrete foundations are recommended to ensure long term stability.

Shipping Information

Delivery:
Free delivery applies to orders over $10,000 within standard shipping zones.
Freight charges apply to orders under this threshold.
Forklift access up to 3,500 lb is required at delivery.


If forklift access is not available, the shipment will be delivered to the nearest cargo depot for customer pickup and offloading.

Depot location details and pickup instructions are provided prior to delivery.

Shipping Method:
Shelters ship as complete kits in steel framed crates or palletized bundles.
Delivery is curbside or yard drop only.
Placement and unloading beyond drop point are not included.

Shipping Timelines:
In stock items ship within 7 to 14 business days.
Ordered in items ship within 60 to 90 business days.
Final timelines are confirmed at order placement.

Pickup Option:
Free pickup is available from select Alpine Structures yards with advance notice.

Coverage:
Canada wide shipping is available.
Remote locations require additional transit time.

TOOLS

Find The Right Dual Truss Model For You

Check Out Free Shipping On Orders Over $10,000.00

Find a Dealer Near You

GO CUSTOM WITH US

Experience a higher standard of shelter design with Alpine Structures. One-on-one collaboration with experienced shelter designers to build a system tailored to your site and use.